We'll participate in EMO 2015.

COGO TOOL's technical info4 - Selection and Usage

■ Proper selection of the End Mill
For use the End mill more economically and efficiently, select the proper End Mill by considering the shape and hardness of work mate-rial and processing efficiency.
Therefore, the diameter, number of the flute, length of the flute, helix angle and materials of the End Mill should be considered.

• Raw Material of Toll

For the cutting process from the structural steel, nonferrous materials to cast iron, Cobalt 8% HSS(SKH 59 grades) is the best. For more efficient processing and longer durability, selct the coating End Mill, power metallurgy HSS End Mill or the Carbide End Mill.

• Number of the flute

important factor of the performance of the End Mill

-2flutes : By the wider chip pocket, the chip can be discharged smoothly but the section size of the tool is narrow so its rigidity reduces. It can be used in the slotting.

-4flutes:By the narrower chip pocket, the chip cannot be discharged freely but the section size of the tool is wide to its rigidity expands. It can be used in the side cutting mainly.

• Length of the cutting part

If working by decreasing the cutting part length, the rigidity can be increased. The projection length of End Mill influences in the rigidity so avoid to increase the length unnecessarily.

COGO TOOL TURKEY inc.

COGO TOOLs also has an office in Turkey.

COGO TURKEY inc.
Rami Kisla Cad. Metal Han NO:83/11
Topcular 34055 ISTANBUL - TURKEY
Phone : ++90 212 544 40 00
FAX : ++90 212 544 40 19

COGO TOOL's Delegation activities

 Our CEO, Jae-gen Lee participated in KOREAN Business Delegation to Eastern Europe(Bulgaria, Croatia, Slovenia) on June, 2010.

 Our CEO, Jae-gen Lee participated in KOREAN Business Delegation to India on January, 2010.

 Our CEO, Jae-gen Lee participated in KOREAN Business Delegation to Uzbekistan, Turkey on June, 2010.

SBA Business Delegation in Beijing.

COGO TOOL's technical info3

• Upward and Downward cutting

Comparison 

Back lash of the feed screw	No influence in cutting	The black lash has to be removed completely
Rigidity of the structure	No influence in case of  the low rigidity	The high rigidity is needed for the stroke
Durability of the cutting edge	It’s disadvantageous because it lifts the structure upward and the force goes up	Because the force comes down and presses the structure but when it’s not installed completely, the materials can be flown to the sky with that force.
Influence of the bulit-up edge	Shorter durability of the flank wear with the fiction during insertion	Longer durability
Friction resistance	Rather low	The friction force during the insertion is low but its stroke can be high to the downward
Finished surface	For the higher friction resistance during insertion, the force to lift upward is high	There is no glossy surface but the rotation resistance during the low feed cannot be occurred so all the surface is rather glossy and even. The finished surface is more glossy than the upward cutting but in case of the soft materials the finished surface can be worsened.
Cutting condition		It raises the cutting speed and feed more than the upward cutting. It’s possible to cut the heavy materials

• Coolant

The coolant is to improve the lubrication, cooling and anti-fusion property so increase the durability and grade of the processed surface, and removes the cutting heat, reduces the generation power and add the productivity like the cleansing effect of the micro chips.

COGO TOOL - Midas Drilling Video

COGOTOOLS' drilling video.


MIDAS KTD DRILLING VIDEO
(KTD-30040D)

-Drilling diameters are from 12.5mm to 50mm and a various of drilling depth is available(2D,3D and 4D).
-Cost-dffect by using 4-edge inset.
-A wide range of drilling such as double plates and inclined surface is possible.
-The especially treated surface of body makes wear resistance much better and tool life much longer.



The Cogo Tool Inc.

#1108, Hoseodae Venture Tower 319,
Gasan-Dong, Geumcheon-Gu,Seoul, South Korea
Telephone : 82-2-2038-0845
FAX : 82-2-2627-5945
E-mail : cogotool@gmail.com
Website : cogotool.com

Helix End Mills

COGO TOOl's Helix End Mill.

■ 4 SEM - 4 Flutes High Speed 45 Helix End Mill
- High speed end mills suitable for HRC62, SUS series and high hardened steels
- Outstanding discharge of chips and performance at high speed cutting as the appearance of High Helix
- Ultrafine particles carbide alloy/TISIN Coating

■ 6 SEM - 6 Flutes High Speed 45 Helix End Mill
- High speed end mills exclusive for high hardened steels
- The optimum performance at cutting the side- Ultrafine particles carbide alloy/TISIN Coating
- Ultrafine particles carbide alloy/TISIN Coating



The Cogo Tool Inc.

#1108, Hoseodae Venture Tower 319,
Gasan-Dong, Geumcheon-Gu,Seoul, South Korea
Telephone : 82-2-2038-0845
FAX : 82-2-2627-5945
E-mail : cogotool@gmail.com
Website : cogotool.com